As a consequence of scaling down my home studio, I sold two audio interfaces, Apogee Duet for iPad & Mac and Propellerhead Balance, to acquire an Apogee Quartet instead. (Yes I was checking out the newer Element 46 and even if the Element series audio quality and mic pre technology are a step above, the Quartet’s specifications are good enough for me, and more importantly I wanted/needed 8 outputs and a convenient front panel control.)
I decided for a 4-channel audio interface because I didn’t need 20+ hardware synths and drum machines up and running all the time. All that stuff took up too much space and I didn’t really use them. They were connected to a mixer – functioning more or less as a patchbay – and now that mixer is redundant. Remember, limitations drive creativity and all.
With the current setup, I’m able to insert outboard gear, not only to use Minitaur and Mopho as analog instruments, but also as signal processors/external filters. That is, with a little bit of routing in Ableton Live, I can send hardware and softsynths to the Moog ladder and Curtis low-pass filters.
Right now I got three analog monosynths (Minitaur, Mopho and SH-101) connected, and Analog Keys operating as an analog polysynth, master keyboard, sequencer and MIDI to CV converter. I can record all synths mentioned on separate tracks at once.
The plan is to switch gear depending on the project. It’s a clean, minimal setup which seems to suit me.
Recently, most time has been spent tweaking the setup, experiment with the gear, and programming and sound designing on the synths. I haven’t made any real compositions for a while though.
Next up could be a cassette tape recorder (to be able to make some lo-fi tape compression/saturation). And I think I’ll get the Strymon Deco pedal and put it in an effect signal chain.