One of my favorite synths is the Analog Four, and with the OS update 1.22 a while back, Elektron added new LFO synchronization modes and destinations and made this synth even more awesome. (If I only could take one of my synths to a deserted island, it would be the Analog Four.) Anyway, in short that means I’m now able to apply pitch tracked LFO FM behavior.

Here’s a way to start (not rules):

  1. Set triangle (as a substitute for sinus) waveform on an oscillator.
  2. Open up both filters.
  3. Set the LFO speed to any multiples of 16.
  4. Set the LFO multiplier to over 512 and synchronize it to the oscillator you’re working with.
  5. Let the LFO restart when a note is played on Trig Mode.
  6. Choose sinus as the LFO waveform.
  7. Set frequency or pitch modulation to the oscillator as LFO destination. (Also try different destinations later, like the filter frequency.)
  8. Set depth of the LFO modulation (or, if you’re using the first oscillator, let the second assignable envelope control this).
  9. If you use Depth A in the step above, then try to fade in or fade out the modulation.

Also, there’s a few videos on YouTube describing these methods, like this, which is a good walkthrough, even though it’s a bit unfocused and lengthy.

Advertisements